Division DirectoryInternal ContactsEIS CloudJR Smith Orders, Invoices, Inventory & MoreEmployee AdvocacyMGI's brands on social mediaLiterature LibraryLiterature odering and fulfillmentMasterSpecProduct configs and specsMGI ProPadMarketing and sales contentMGI SwagMGI branded gear and clothingRepLoginOrder Status, Analytics, Inventory, and DocumentsWebsite AnalyticsRealtime data and analytics
Jay R. Smith Mfg. Co.
2781 Gunter Park Dr. East
Montgomery, AL 36109-1405 USA
© [[copyRightYear]] Jay R. Smith Mfg. Co., Inc. All Rights Reserved.
Built by Morris Group International, Inc.
Member of Morris Group International
Figure Number: 4781
Contact a Representative

4781Slammer Access Doors

Our durable, vandal-resistant, Slammer Access Doors allow assigned personnel only, access to plumbing and electrical apparatus in finished walls in institutions where they may be subject to abuse. The doors are fabricated of 10 Gauge steel and set in a welded frame constructed of 3/16” (5) x 2” (200) x 2” (200) angle steel with pre-punched mounting holes. Heavy duty hinges are welded to the door and frame. The latch is a Folger Adams #10 lock. If desired, the door can be fitted with a high security, vandal resistant, detention type lock provided by other vendors. The door assembly is delivered primed and ready for paint.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov - Learn More about this warning
Shows specifications for standard configuration. Configuration options may change specifications.
  • Variations
    Lock Provided by Others -LD, Masonry Anchor Straps -MAS, Mortise Cylinder Lock (Prep) -MLP, Folger Adams #10 Lock -FA12, Folger Adams Key for #10 Lock -FA12KEY, (2) 3/8” (10) Tappings -TAP
SubmittalSubmittal 4781 Access Doors
View
Technical Drawings
DWG 4781 Access DoorDWG162 KB
Literature / Videos
MGI Corporate Brochure (pdf)Who we are, Our History, Morris Group International TodayPDF8 MB
MGI Brands Flyer (pdf)MGI Brands Flyer (pdf)PDF712 KB
Access Door Brochure (pdf)Access Door Product BrochurePDF5 MB
Technical Data for CleanoutsTechnical Data for CleanoutsPDF906 KB
Parts Order Guide for CleanoutsParts Order Guide for CleanoutsPDF910 KB
Order Guidelines for CleanoutsOrder Guidelines for CleanoutsPDF120 KB
Specifications US Govt ComplianceItems complying with U.S. government specificationsPDF34 KB
Can't find what you are looking for? Get in touch
GUIDE SPECIFICATION:
Provide 4781 Series, Slammer Access Doors (specify options). Access Door shall be fabricated from 10 gage steel, and frame from 3/16" x 2" x 2" angle steel, welded and with pre-punched mounting holes. Door shall have heavy duty hinges welded to the door and frame. Finish shall be a prime coat suitable for painting.