Sani-Ceptor® Stainless Steel and Nickel Bronze Top Floor Drain with Wide Flange
Share this page

Sani-Ceptor® Stainless Steel and Nickel Bronze Top Floor Drain with Wide Flange

Figure Number:  DX3001-DX3009
Product Function:
Used in all locations where superior sanitation, corrosion resistance, durability and longevity are required, and where the floor or deck will be surfaced with troweled, composition elastomeric covering. These coverings consist of slip sheet bondcoat, membrane and finish coatings. They form an entirely seamless waterproof, resilient traffic floor or deck. They are normally applied in 3/16" (5) thickness, however, thicknesses may be increased to 1/2"(13) for specialized application. Refer to covering manufacturer for specifications and thicknesses to be used.

Regularly Furnished:
14 Gauge Type 304 SS Receptor Body with Seepage Control Holes, Reinforced Stainless Steel Square Flange set 3/16"(5) Below Rim and Cast Type 316 SS Ribbed Non-Tilt Loose Set Grate with 1/2"(13) Square Holes. Flange has Glass Blast Finish for Bond Coat Adhesion and Countersunk Anchoring Holes. Body is Provided with Anchor Clips. Perforated SS Dome Bottom Strainer or Sediment Bucket is Indicated by Figure Number. Body Interior, Dome Bottom Strainer and Sediment Bucket are polished to No. 4 finish.
Product Details
  • Product Type:  Sanitary Floor, Area and Indirect Waste Drain
Loading...
{{ promotion.promotionTypeName }}

{{ product.promotionCatchPhrase }}

Model Number: {{ product.modelNumber }}

{{ product.productName }}


View on {{ product.siteDisplayName }}
NameDescriptionFile Size
Specifications US Govt ComplianceItems complying with U.S. government specifications34 KBDownload
CSI Specifications for Sanitary Floor DrainsCSI Specifications for Sanitary Floor Drains327 KB
STAINLESS STEEL WIDE FLANGE SANI-CEPTOR

Smith No. DX3001 series stainless steel 12” square raised rim top with wide flange body, stainless steel ribbed non-tilt loose set grate and perforated dome bottom strainer for use where the floor or deck will be surfaced with troweled composition elastomeric covering.

NameDescriptionFile Size
Parts Order Guide for Sanitary Floor Drains1222 KBView

Optional Materials

  • Drains: Fabricated from Type 316 Stainless Steel
  • Funnel: Type 304 Stainless Steel
  • Funnel: Type 316 Stainless Steel

Variations

  • BW Butt Weld Outlet (Specify Schedule -S05, -S10, -S40)
  • Less Seepage Control Holes -LSH
  • T Male Threaded Connection
  • Trap Primer Connection -P050 1/2" (13), -P075 3/4" (19)
  • Flange Top Set 3/8(10), 1/2"(13) Below Top of Rim and Grate -F
  • Screed Guides -SG
  • 1/4(6) x 2 1/2"(64) Stainless Steel Flat Heat Anchor Bolts Each with Two Washers and Two Nuts (set of 8) -AB
  • 1/4(6) x 2 1/2"(64) Stainless Steel Flat Head Anchor Screws (set of 8) -AS