6200 SeriesGutter Drains

This rectangular top drain is adaptable to narrow scum gutters. Size of top selected is dependent on width of gutter and the amount of drainage area of top grate which is required. Angle types should be used where it is necessary to direct the connecting pipe through the gutter side wall.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov - Learn More about this warning

Shows specifications for standard configuration. Configuration options may change specifications.

Variations
Anchor Flange -F, NO-HUB Adaptor, Vandal Proof -U - Screws, (2) 3/8” (10) Tappings -TAP
Optional Materials
Bronze Body -BB, Galvanized Cast Iron -G, Nickel Bronze Face -NB, Polished Bronze Top -PB, Stainless Steel (see fig. 9795)
Product Type
Drain

SubmittalSubmittal 6200 Series Drain (pdf)

View

Technical Drawings

6200 Series Drain (dwg)

Gutter Drains [Bottom Thread Outlets 6205T, 6210T, 6225T, 6230T; Angled Threaded Outlet 6250T, 6270T]

DWG40 KB

Literature / Videos

MGI Corporate Brochure (pdf)	Who we are, Our History, Morris Group International Today	PDF8 MB
MGI Brands Flyer (pdf)	MGI Brands Flyer (pdf)	PDF712 KB
Specifications for Special Purpose Drains	Specifications for Special Purpose Drains	DOC110 KB

Can't find what you are looking for? Get in touch

Bottom Outlet
6205T | 3-3/4" x 2-1/4" for 1", 1-1/2", 2" Threaded Outlets
6210T | 5-9/16" x 2-13/16" for 2", 2-1/2", 3" Threaded Outlets
6225T | 10-1/8" x 2-3/8" for 1-1/2", 2" Threaded Outlets
6230T | 12-1/16" x 4" for 2", 2-1/2", 3" Threaded Outlets
6230T | 12-1/8" x 4-1/8" for 4" Threaded Outlet
---
Angled Outlet
6250T | 4" Wide x 2-3/4" Exposed Front-to-Back Dimension
6270T | 5-1/4" Wide x 2" Exposed Front-to-Back Dimension