Grease Interceptors with Receiving Cradle for Recessed Installation with Semi-Automatic Draw-Off

Share this page
WARNING: Cancer and Reproductive Harm -

Learn More about this warning

Grease Interceptors with Receiving Cradle for Recessed Installation with Semi-Automatic Draw-Off

Figure Number:  8300GT
Product Function:
The all steel receiving cradle provides positive support for the interceptor and vertical adjustability for the inlet and outlet connections to meet the drainage piping. The receiving cradle can be set in the slab at the time of pouring or set in a pre-sleeved opening in the rough slab. The cradle is secured and suspended in the rough slab by its anchoring flange. The semi-automatic draw-off type grease interceptor is lowered into the receiver cradle and adjusted to the elevation of the drainage piping. The interceptor, line shut-off valve and flexible grease draw-off hose are readily accessible for cleaning and inspection simply by removing the cradle cover which sits flush with the floor. The cradle supports the interceptor and has no provisions for waterproofing the interceptor in relation to the cradle and ceiling below.

Regularly Furnished:
Fab. Steel Interceptor and Receiving Cradle with Gray Duco Coating Inside and Outside with Steel Cone, Flexible Draw-off Hose and Cap, Line Shut-off Valve and Flow Control Fitting.
Product Details
  • Product Type:  Interceptor
{{ promotion.promotionTypeName }}

{{ product.promotionCatchPhrase }}

Model Number: {{ product.modelNumber }}

{{ product.productName }}

View on {{ product.siteDisplayName }}
NameDescriptionFile Size
Specifications US Govt ComplianceItems complying with U.S. government specifications34 KBDownload
CSI Specifications for InterceptorsCSI Specifications for Interceptors131 KB

Smith No. 8300GT series cast iron/steel with steel cradle support with duco coating and flow control fitting. Flow rating of . . . GPM and grease capacity of . . . pounds. Automatic draw-off valve with flexible hose and cap to allow removal of grease without removing cover. Hot water connection minimum 140° with shut-off to be provided for cleansing operating. Fully enclosed cradle with integral drip pan Smith No. 8300GT (-W).

NameDescriptionFile Size
Parts Order Guide for InterceptorsParts Order Guide for Interceptors1552 KBView

Optional Materials

  • Acid Resistant Coating Inside -ARI
  • Acid Resistant Coating Outside - ARO
  • Acid Resistant Coating Inside and Outside -ARIO
  • Aluminum Cover -AC
  • Aluminum Cover for Cradle -ACC
  • Acid Resistant Coated -ARC - Cradle Only


  • Cover Recessed for Terrazzo Ceramic or Quarry Tile -QC
  • Cover Recessed for Vinyl or Asphalt Tile -TC
  • Fully Enclosed Cradle with Integral Drip Pan -W
  • NO-HUB Adaptor - (2) Required