Vertical Fittings with Two Side Inlets Extra Heavy Duty 750 Lbs. for Siphon Jet Water Closets
Vertical Fittings with Two Side Inlets Extra Heavy Duty 750 Lbs. for Siphon Jet Water ClosetsVertical Fittings with Two Side Inlets Extra Heavy Duty 750 Lbs. for Siphon Jet Water Closets
Share this page

Vertical Fittings with Two Side Inlets Extra Heavy Duty 750 Lbs. for Siphon Jet Water Closets

Figure Number:  0250Y-M54-XX
NO-HUB
Product Function:

Contractor Friendly Support for Bariatric Siphon Jet Water Closet

Contractor Friendly Features:

Specifically for Figure -M54:
(Side Mounted Leg):

  • Symmetric construction.
  • Increased load bearing capability
  • One bolt per leg allowing quicker and easier pre-fabrication.
  • Incremental markings in 1/2" (51 mm) increments.
  • Quicker rough-in for the installing contractor.
  • Three Anchor Points for Secure Installation

Specifically for Figure-M54-M58:
(Side Mounted Leg and Faceplate with “O” Ring Seal):

  • Integral adjustable wall coupling nipple, and test cap.
  • Adjustment at the faceplate rather than at the rear of the water closet (coupling).
  • 10” (254mm) long nipple cover various installations.
  • Enhanced sealing with an “O” ring at the faceplate.

Product Details
  • Product Type:  Water Closet Support
Related Figure Numbers
  • 0250Y-M58-M54-XX - NO-HUB with "O" Ring Faceplate
Loading...
{{ promotion.promotionTypeName }}

{{ product.promotionCatchPhrase }}

Model Number: {{ product.modelNumber }}

{{ product.productName }}


View on {{ product.siteDisplayName }}
NameDescriptionFile Size
Specifications US Govt ComplianceItems complying with U.S. government specifications34 KBDownload
FLOOR MOUNTED BACK OUTLETWATER CLOSET FITTINGS

Smith No. 0200 or 0300 adjustable series fixture supports with type No. 2 outlet connection. Where furred wall space is not sufficient for the adjustable series, Smith “compact” No. 0400 series or Smith No. 0670 thru 0680 waste fitting assembly with Type No. 2 closet outlet connection may be used.


WALL HUNG SIPHON JET WATER CLOSET SUPPORTS

Smith No. 0200 series adjustable shallow rough-in support for one-pour floor construction.Where two-pour floor construction is required, Smith No. 0100 series adjustable deep rough-in support may be used. Where furred wall space is not sufficient for the adjustable series, Smith “compact” No. 0400 series may be used.

NameDescriptionFile Size
Parts Order Guide for Water Closet SupportsParts Order Guide for Water Closet Supports746 KBView