RSS FEED9832 Smith/ACO Trench Drain Series |
|||||||||
|
|
|
|
|
|||||
|
9832 Shallow Channel Systems
|
|||||||||
The 9832 Shallow Channel Systems provide
a cost effective solution in applications where surface drainage or ducting is needed
but installation depth is restricted. 9832 Shallow Channel Systems (Channels #080
and #0100) consist of two depths, 3.15" and 3.94" (80mm and 100mm). Made from high strength polyester or vinylester concrete, these units are lightweight and easy to install. Each channel has an interlocking tongue and groove profile to assist with alignment during installation. All of the standard grates and covers available for use with the 9814 Channel Slope® System can be utilized with 9832 Shallow Channel Systems. Closing end caps are available for the 9832 Shallow Channel Systems. |
Smith/ACO Technical Installation Guide Channel Slope® is a registered trademark of ACO Polymer Products, Inc. Note: This trench drainage system is designed for "on grade applications only", as there are no provisions for a flashing flange or flashing clamp. |
 |
|
|
 |
