9818 Smith/ACO Trench Drain Series
 
9818 Trench Drains
Save this page or send via email
9818 Series with Quicklock®
9818 Quicklock 9818 Series QuickLock® assembly and removal of the cover grate is easier than ever.

QuickLock® is a revolutionary grate locking system designed to improve accessibility to the channels for cleaning and maintenance. QuickLock® replaces the standard bolt and bar locking device used in many other trench drain systems.

The factory assembled components that make up the QuickLock® locking system include a smooth stainless steel grate lug and a spring clip type locking bar. (See below for illustration).
Assembly & Removal
QuickLock® components are preassembled to the grating and only the locking bar must be fit into place by the installer. The locking bar holds itself into the channel's locking pockets with tension side grips which can be released with a flat blade screwdriver. Removing the grates for channel cleaning is simple. A grate lifting tool, Fig. No. 9859 Quicklock® hook (shown below), is offered for safe removal.
Spring Clip
The spring clip in the locking bar is designed to allow centering of the grates for final positioning.
Locking Force
The locking force is sufficient to hold grates in place up to and including load Class E.
Snaps into Place
There is no need for tools to fasten the grate into the channel. The grate snaps into place with a quick impact.
Load Chart

QuickLock® is a registered trademark of ACO Polymer Products, Inc.
Quicklock Hook

9859 QuickLock® Hook
The 9859 QuickLock® hook is designed to ease the removal of grates from trench drainage system using the QuickLock® securing method.

RELATED LINKS:
Quicklock® Assembly Components and Cross Section

9870 Drainage Systems Grates-
Light Duty | Heavy Duty  | Extra Heavy Duty

Installation Drawings (PDF and DWG)

Smith/ACO Technical Installation Guide
 
Trench Drains Index
 
Go Back
 
Go Forward