|
|
| Used in installations where multiple downspouts are connected together to a single pipe into the vortex filter. The
medium capacity vortex rainwater filter can filter up to a 2,200 square foot roof area for site irrigation, toilet and urinal flushing, janitorial use, laundries, fire protection, evaporative cooling tower make-up, process water or other non-potable uses. |
Fig. Number: RH95218-04 –
4” Sewer and Drain Outlet
|
Resources:
Submittal (pdf)
Drawing (dwg)
Function: The medium capacity vortex rainwater fine filter is typically installed in the underground piping system to remove debris from the storm water system and divert 95% of clean rainwater to an underground storage tank. (An above grade application is possible). The filter operates as a first flush device. The filter assembly consists of a 12 inch stainless steel lift handle, removable stainless steel .011” fine mesh filter and polypropylene filter housing, upper ring, and housing lid. Circulating air within the main housing dries the mesh filter thus reducing contamination of the rainwater. The mesh filter should be cleaned at least once a year. The housing lid carries loads up to 30 tons (DIN 1072/SLW30).
How the Vortex Rainwater Filter Works:
Click here for video highlighting how the vortex rainwater filter works. |
Regularly Furnished:
Polypropylene Filter Housing, Upper Ring, and Housing Lid (RH9518-04)
.011 inch Stainless Steel Fine Mesh Filter (RH9520F)
12 inch Stainless Steel Lift Handle
Accessories:
Blind Insert (RH9518BI)
Used in place of the mesh filter to divert flow directly
to the storm water system.
20” Extension Tube (RH9520ET)
This polypropylene tube is used for inspection
and as an access opening to the ground level. It is
fitted with a collar to accept the lid. Is easily cut to
length due to molded-in parallel lines. Up the three
extension tubes can be combined together.
Stainless Steel Wall Bracket (RH9520WB)
For securing the filter unit to a wall in above
ground applications.
Fixing Set (RH9520FS)
To secure the handle to the inside of the filter
so it will not be lost.
Seepage Basket (RH9518SB)
For trapping dirt and debris from the rainwater before
it exits filter. It must be emptied and cleaned
periodically.
Options:
25 inch Stainless Steel Lift Handle (RH9520LH25)
To remove mesh filter for cleaning.
39 inch Stainless Steel Lift Handle (RH9520LH39)
To remove mesh filter for cleaning.
|
For Pricing, Contact Your Local Representative. |
|
