Interceptors Featured Product
  Grease+Gard® Retrofit Skimmer and Grease Recovery Device, Figure Numbers 8165-8176, 8960 and 8980:
The Grease+Gard® Retrofit Skimmer and Grease Recovery Device use patent pending technology that automatically removes FOG from the interceptor before it becomes a problem. The principal of the system are easily understood. The Grease+Gard® system has a belt and heater assembly that is controlled by an 24-hour timer. Upon a given schedule the heater warms up the water in the interceptor and the agitator propeller helps to liquefy the FOG to be extracted. The belt assembly picks up the FOG that is skimmed into a trough. From there it flows into a storage reservoir. 
 
The Grease+Gard® Concept:
    • The Grease+Gard® Grease Recovery Device is available in most common sizes. The 8165 and 8175 GRDs are available in 20, 25, 35, and 50 GPM. The 8166 and 8176, Low Type GRDs are available in 20, 35, and 50 GPM. 
    • The Grease+Gard® Retrofit Skimmer can be configured to work with most existing grease interceptors on the market today.
    • The Grease+Gard® GRD interceptors are available in Type 304, 16 gauge stainless steel and/or Duco coated mild steel. 
    • The Grease+Gard® device is the only GRD on the market that has the patent pending Agitator technology.
    • The Grease+Gard® Skimmer and GRD are completely sealed devices designed to keep odors out of the facility.
    • The Grease+Gard® device is easy to access and maintain. There are two latches to remove the device from the interceptor so it can be taken outside of the facility to be serviced. 
Go to Resources, Interceptors, to view and print the Grease+Gard® submittals, images and literature.
 
   
 

Interceptor Section Index

Go back

 Go Forward