Closet Support Compact Fixture Supports

COMPACT FIXTURE SUPPORTS

Smith compact fixture supports with waste fittings are designed specifically for installation where non-adjustable vertical fittings are suitable for construction requirements and minimum pipe space is of prime consideration. These supports are available in both offset and center line waste type.

The offset waste type features an absolute minimum center to back dimension and is arranged with vertical vent connection making it suitable for multi-story installation.

The center line waste type does not have the vent connection and is limited to single story installations. The extension of the vertical waste line is the stack vent.

Both types are available for siphon jet or blowout closet applications.

3" Minimum shown is attained using Regularly Furnished ABS Nipple and Adjust-to-Wall Coupling.

Absolute Minimum of 1 1/2" is available using short butt end nipple, less Adjust-to-Wall Coupling.

DETERMINING LEFT OR RIGHT HAND COMPACT FITTINGS

Face wall looking into closet outlet connection. If connection is on the left side of the
vertical stack, it is a left hand support. If on the right side, it is a right hand support.

BASE SUPPORT ADJUSTMENT

Adjustment limitations are shown above for both one and two-pour construction.

All compact series fixture supports are available with auxiliary inlets. The offset series are available with either a sanitary sweep type inlet or a flat boss type connection. The center line waste type supports are available with only a flat boss type inlet connection. Both inlet types are available in 1 1/4, 1 1/2 or 2” thread. A 2” caulk and no-hub connections are available for the sanitary sweep type inlet.

COMPACT FIXTURE SUPPORTS Smith compact fixture supports with waste fittings are designed specifically for installation where non-adjustable vertical fittings are suitable for construction requirements and minimum pipe space is of prime consideration. These supports are available in both offset and center line waste type. The offset waste type features an absolute minimum center to back dimension and is arranged with vertical vent connection making it suitable for multi-story installation. The center line waste type does not have the vent connection and is limited to single story installations. The extension of the vertical waste line is the stack vent. Both types are available for siphon jet or blowout closet applications.
3" Minimum shown is attained using Regularly Furnished ABS Nipple and Adjust-to-Wall Coupling. Absolute Minimum of 1 1/2" is available using short butt end nipple, less Adjust-to-Wall Coupling.
DETERMINING LEFT OR RIGHT HAND COMPACT FITTINGS Face wall looking into closet outlet connection. If connection is on the left side of the vertical stack, it is a left hand support. If on the right side, it is a right hand support.
BASE SUPPORT ADJUSTMENT Adjustment limitations are shown above for both one and two-pour construction.
All compact series fixture supports are available with auxiliary inlets. The offset series are available with either a sanitary sweep type inlet or a flat boss type connection. The center line waste type supports are available with only a flat boss type inlet connection. Both inlet types are available in 1 1/4, 1 1/2 or 2” thread. A 2” caulk and no-hub connections are available for the sanitary sweep type inlet.