VERTICAL OFFSET FITTINGS FOR FLOOR MOUNTED BACK OUTLET WATER CLOSETS
HOW TO SELECT FROM CHART
Locate inlet variations desired and select correct figure number series from column designating whether fittings should be left hand (L), right hand (R) or double (D). EXAMPLE - double fitting with inlets 1 and 4 is desired. Correct figure number is 0673D. The inlet variations available on fittings are indicated by the yellow rectangles on the selection chart.
  
0677 Chart
 
NOTES: Double fitting is typical of left hand or right hand. Inlets 1 and 6 are always on opposite side of vent. Inlets 2, 3, 4 & 5 are always on vent side of fitting.
TriangleLocations of pads for 1 1/2" or 2" threaded auxiliary inlets. Specify size and inlet desired.
*Available on special order only.