Cleanouts and Access Covers including Twis-To-Floor Cleanouts, Cleanouts and Access Covers :: 4000 Series

<h1>4000 Series Specification Cleanouts and Access Covers provide access to drains and/or pipes within a commercial building for the purpose of providing an entry point to the piping system so it could be cleaned/unclogged (using a snake or other drain blockage removal device), used for maintenance or testing (See our Figure Number 4505 BOSS Cleanout and Test Tee) by a Contractor or Building Inspector.</h1> <h2>Jay R. Smith Mfg. Co. offers a wide variety of Engineered Specification Cleanouts and Access Covers to blend and conform with the surrounding flooring and wall areas. The Twis-To-Floor® 4000 Series Cleanout line features all of the advantages required when specifying and installing a Cleanout. These built-in features include: outside threads, no tilting smooth outside surface and protective ring, maximizes adjustment during and after the pour a shorter ferrule to make it easier to install an anchor flange and flashing clamp that provide adjustability that allows for precise membrane placement after the ferrule is installed the same size Cleanout top for 2 inch through 4 inch outlet ferrules, creating aesthetic appeal and uniformity after the pour and tile and terrazzo covers that can be interchanged with scoriated finished floor covers after the concrete pour to accommodate job site changes. Wall access covers are installed to give access to cleanout plugs which are concealed in a vertical stack, valves, controls or special devices installed behind a wall. Access Covers are available with or without frame, as determined by application and wall construction. Smith offers its Cleanouts in attractive nickel bronze, polished bronze or chrome plated bronze, or cast iron for unfinished or heavy traffic access.</h2> <p> <b> Ordering Guidelines for Jay R. Smith Cleanouts, Cleanouts and Access Covers Pictorial Index, </b><strong> Jubilee Series Twis-To-Floor<sup>®</sup> Cleanout Features</a>, Technical Data for Adjustable Floor-Level Cleanouts, Finished Floor Cleanouts with Adjustable Tops</strong>, <strong>Tile Floor Cleanouts with Adjustable Tops, </strong> Terrazzo Floor Cleanouts with Adjustable Tops, <b> Terrazzo Floor Cleanouts with Adjustable Tops</b>, Terrazzo Floor Cleanouts with Adjustable Tops, <b>Terrazzo Floor Cleanouts with Adjustable Tops</b>, Floor Cleanouts with Adjustable Tops for Unfinished Areas, Floor Cleanouts for Unfinished Areas,<b> Multi-Purpose Floor Cleanouts with Internal Closure Plug</b>, Technical Data for Access Covers, Caulk Ferrule Cleanouts with Access Covers, <b>Caulk Ferrule Cleanouts with Frame and Cover</b>, Caulk Ferrule Cleanouts with Access Covers-Taper Threaded Plug, <b> Cleanout Tees with Access Covers</b>, Wall Access Covers, Wall Access Covers and Flush Valve Boxes, Wall and Ceiling Access Doors and Floor Access Covers</a>, Floor Access Covers</p> <h3>Specification Wall Access Covers for Non-Residential Construction Projects - Cleanout plugs are installed in many concealed vertical stacks, and access to these plugs can be provided by wall access covers. Wall access covers do not have frames and are installed in "face-of-wall" type application. After the finished wall is completed, selection of proper size is determined by the amount of area to be covered. Access Covers are secured by means of a center screw which is threaded into tapping in the head of the plug. Shallow covers are suitable for most installations. Wall access covers can be used for any type of wall, but should never be used on floors For more information visit the Cleanout and Access Cover section of this Web site, or contact your local representative.</h3> </p> <h5>-This page uses frames, but your browser doesn't support them!</h5> </body>