Products
Backwater Valves and Traps
Cleanouts
Floor Drains
- Adapters and Reducers
- Drains with 12" Round Tops
- Drains with 8.5" Round Tops
- Drains with Adjustable Strainer Heads
- Drains with Integral Trap or Backwater Valve
- Flushing Drains
- Form It® Drain Installation Device
- Large Capacity Drains
- Parking Deck Drains
- Planting Area Drains
- Special Purpose Floor Drains
- Traffic Drains
- Trap and Primers
- Trench Drains and Grating
Hydrants
Interceptors
- Grease Interceptors
- Grease Interceptors with Receiving Cradles for Recessed Installation
- Grease+Gard® II Retrofit Skimmers, Recovery Devices, and Solids Interceptors
- Large Capacity Grease Interceptors
- Lint and Sediment-Oil Interceptors
- Oil Interceptors
- Remediator® Grease Treatment System
- Sand Interceptors
- Solids Interceptors
- Ultracept® Oil-Water Separator Interceptors
Lavatory and Sink Supports
Rainwater Harvesting
Roof Drains
- Cornice - Parapet - Canopy - Gutter Drains
- General Purpose Roof and Deck Drains
- Green Roof Drains
- Large General Purpose Roof Drains
- Large Special Purpose Roof Drains
- Promenade and Parking Area Drains
- Raintrol Roof Drains
- Roof Accessories
- Scupper Drains
- Siphonic Roof Drain
- Special Roof Applications
- Universal Roof Drains Accessories
Sanitary Floor, Area and Indirect Waste Drains
- FormIt® Drain Installation Device
- Funnel-ceptor® Indirect Waste Drains
- Funnels and Fixed Air Gaps
- Roof-ceptor Indirect Waste Drain
- Sani-ceptor ARC Waste Drains with ARC Square Non-Traffic Tops
- Sani-ceptor ARC Waste Drains with ARC Rectangular Non-Traffic Tops
- Sani-ceptor ARC Waste Drains with ARC Round Non-Traffic Tops
- Sani-ceptor ARC Waste Drains with ARC Square Non-Traffic Tops
- Sani-ceptor ARC Waste Drains with Rectangular Nickel Bronze Tops
- Sani-ceptor ARC Waste Drains with Round Nickel Bronze Tops
- Sani-ceptor ARC Waste Drains with Square Nickel Bronze Tops
- Sani-ceptor Can Washing Sanitary Floor Drains
- Sani-ceptor Stainless Steel Drains
- Water Supply Control Boxes For Flushing Rim and Can Washing Drains
Smith Drainage Systems
Specialties, Stainless Steel and Carbon Steel
- Bariatric Wall Mounted Toilet
- Condensate Trap and Contamination Drains
- Fresh Air Inlets
- Roof Drain
- Scupper Drain, Pit Drain and Backwater Valve
- Smith Stainless Steel Trench Drain System
- Special Purpose Floor Drains
- Stainless Steel Cleanout
- Stainless Steel Floor Drains
- Stainless Steel Floor, Area & Indirect Waste Drains
- Stainless Steel Trench Drain System
- Trap Standards for Service Sinks
Specialty Purpose Drains and Fittings
Water Closet Supports
- Adjustable Fixture Supports
- Bariatric Adjustable Fixture Supports
- Compact Fixture Supports
- Face Plate Type Fixture Supports without Fittings for Water Closets
- Hi-Set Elevated Adjustable Fixture Supports
- Inlet Stack Fittings
- Off Set Waste Fittings
- Residential Fixture Supports
- Urinal Supports for Off-The-Floor Urinals
Water Hammer Arresters
Quad Close Trap Seal Device
Documents:
Figure Number 2692
Submittal
DrawingProduct Function
The purpose of the trap seal is to minimize the evaporation of the trap seal for the floor drain. It will open to allow the flow of drainage and close when there is no flow. The trap seal is for use in the floor drain outlet or the throat of adjustable strainers.
Regularly Furnished
Trap Seal formed from a chemically resistant elastomer.
Related Links:
