| |
| Standpipe Below Grade Rainwater Harvesting Package for Roof Area Up to
2,000 Sq. Ft. at a Single Downspout |
Order Fig. Number: RH9500-02 |
Drawing for illustration purposes only. |
1 Horsepower Suction/Booster Pump
(Specify 115 or 220 volts) – RH9540-1BP, a complete unit includes a pump, motor, diaphragm tank, pressure and flow sensor, control and check valve for residential applications. The controller
ensures that the pump starts automatically when water is consumed and stops automatically when the consumption ceases.
Operating specification for booster pump
(RH9540-1BP):
System Pressure – Max. 109 psi (7.5 bar)
Inlet Pressure – Max. 44 psi (3 bar)
Suction Lift – Max. 26 ft.
Liquid Temperature – 32ºF to 95 ºF
Ambient Temperature – 32ºF to 113 ºF
Rainwater Harvesting Storage
Container Providers
Specify Downspout Converter Kit:
2” x 3” Kit – RH9510DK3
3” x 4” Kit – RH9510DK4 |
Function: Single downspout rainwater system with rainwater standpipe filter collector, storage tank floating filter, and pump. The standpipe package works on roof areas up to
2,000 square feet to collect rainwater for landscaping, lawn irrigation, car washing, or other non-potable uses.
Regularly Furnished: Downspout filter collector
(RH9511-04) and downspout clip (RH9510SC); 1” flexible hose (RH9510TH)
with 2” connection to connect filter to storage tank; downspout converter kit to connect downspout to filter (specify size); floating filter (specify coarse or fine filter); and pump (specify voltage).
Specify Course or Fine Floating Filter:
Floating Filter with Coarse Filter Housing –
RH9532C
Floating Filter with Fine Filter Housing –
RH9532F
Optional Component:
Float Switch for Dry Run Protection –
RH9542FSO
|
|
For roof areas above 2,000 square feet see "Selecting a Rainwater Harvesting Package by Roof Area." |
|
|
